access your oil analysis
The electronics laboratory at Lorencini Brasil develops and sells measurement and test equipments with high storage capacity, the highest technology and the best cost X benefit balance in the market.
Use our solutions to offer the following services for your customers:
Insulation Resistance Meter (IRM)
It measures the insulation resistance and dielectric absorption, with a testing range of 0 to 10 KVdc, measuring range of 0.001 to 200 Teraohms in 5 ranges, digital indication of voltage and resistance without floating. Continuously adjustable voltage. Circuit comprising meter/earth/guard to eliminate spurious current. 110/220 Vac Power supply and a 12 Vdc Battery.
It generates a current of up to 20,000 Aac and 5,000 Adc, and power up to 30 KVA, according to the model. It provides a voltage for shunt test of up to 900Vac, auxiliary synchronized outputs with start, digital timer, polarity test, relation and continuity, digital displays for voltage and current, and single phase power supply of 220 to 440 Vac.
High Voltage Source (HVS)
It provides AC or DC voltage, of 5KV to 200KV with a power up to 300KVA, depending on the model. Digital display of 3 ½ digit. for voltage and current, pre-definition of current and testing time. It provides two speeds for voltage increase (slope), memory detection of over current voltage or accuracy lower than 2% FE and 110/220Vac power supply for all models.
Contact Resistance Meter (MRC)
It generates a measurement current up to 100Adc, depending on the model. It measures resistances with a resolution up to 0.1 u, and 200u to 20 ranges, through a switch, depending on the model. Digital display of 4½ dig. for resistance/voltage and 3½ dig. for current; direct automatic reading, accuracy of 0.5% FE, 110/220Vac power supply and a rechargeable 12 Vdc battery.
Transformer Ratio Meter (TRM)
It measures the turns ratio of single-phase or multi-phase transformers, measuring range of 0 to 300 (e) through switches, current display, voltage display and null with a display of 3 ½ dig. Also up to 2000 with direct reading. Internal battery for field measurement, with an accuracy of ±0.1% at the point, 110/220 Vac power supply, for all models.
Current scale: 0-10 A
Measurement scales: